Equipment Name: hydraulic bending machine
Specifications Model: WGX67K-63T / 2500
Main performance characteristics: fast, no oil seepage, high positioning accuracy;
The specific configuration is as follows:
A: Mold:
Lower mold heat treatment, an increase of mold wear resistance and service life.
Second: the backgauge aspects:
1: X-axis ball screw, round rail, improved accuracy and reduced wear and tear;
2: Z-axis beam to increase the two circular rail, easy to move around fingers;
3: Drive screw increased dust cover, to improve the block in the harsh environment of the service life and accuracy;
4: Finger refers to the lift adjustment type, convenient and simple adjustment;
5: selection of synchronous wheel, belt drive, high precision, low noise.
Three: Pipeline:
The sleeve type connector is matched with the high pressure hose: increased the hydraulic tightness, has overcome the oil spill, the card valve.
4: system control aspects:
CNC system: A62; can achieve dual-axis control: backgauge forward and backward; bending angle; the other with automatic diagnostic error alarm, A62 system can be programmed 40 programs, each program 25 steps; Electrical memory function.
Five: Cylinder area
1: Japan NOK seals, and the piston rod surface frequency, hard chrome plating, high hardness, good wear resistance;
2: External mechanical stop positioning Y axis, simple adjustment, easy maintenance.
Six: slider movement performance
1: CF20 bearing orientation, wear resistance, smooth movement;
2: GCR15 guide rail with heat treatment of bearing steel production, high wear resistance.
Seven other aspects:
Foldable lifting support rack, easy to adjust and simple.